• 0 Posts
  • 14 Comments
Joined 2 years ago
cake
Cake day: June 11th, 2023

help-circle
  • What is this? A Twitter post?

    Just about. JWZ is known for his cynical hot takes on tech in general.

    I don’t think any of his complaints are invalid, though his conclusions are uncharitable at best. Making a communication tool that’s both reasonably secure and sufficiently palatable to people who don’t know how to use computers to achieve broad adoption is a hard problem with no perfect solutions. If he has a better idea, well… he’s a skilled and somewhat famous programmer; he’s better equipped than most to implement it.




  • Well… sort of.

    Batteries perform differently under load. A battery that delivers 10Wh under a 1W load will probably deliver less (and get warmer) under a 10W load. Power supplies also perform differently under load, and DC-DC switching power supplies perform differently based on the output voltage. Generally, a larger voltage conversion and/or a higher load is less efficient. There’s also going to be some base power consumption in the circuit, so the most output power is probably achieved at some sort of medium load.

    To make things more fun, batteries are usually tested under constant current, not constant power. The increasing current as the battery drains of a constant power load will result in less total power, and constant output power often means increasing input power as the battery drains.

    In short, the real world is complicated. Giving best and worst case Watt-hours could be a reasonable approach.



  • Powerbanks are where it’s most problematic. They’re usually reporting the capacity of the battery cells in mAh. Those cells will be at 2.8-4.2V during operation, but the powerbank outputs 5V, or in modern powerbanks some higher number. 5000 mAh at the 3.6V average of the cells during discharge is certainly not 5000 mAh at the 9V it’s giving to my phone.

    It’s not going to give my phone 2000 mAh @ 9V or 18 Wh as the math would suggest either because it’s well below 100% efficient. I’m not sure what’s reasonable to demand in terms of advertising here since efficiency will vary with output voltage and output wattage.





  • There’s a significant distinction between servers that are actively malicious as you’re describing and servers that aren’t fully compatible with certain features, or that are simply buggy.

    Lemmy, for example modifies posts federated from other platforms to fit its format constraints. One of them is that a post from Mastodon with multiple images attached will only show one image on Lemmy. Mastodon does it too: inline images from a Lemmy post don’t show on vanilla Mastodon.

    I’ll note that Lemmy’s version numbers all start with 0. So do Piixelfed’s. That implies the software is unfinished and unstable.